19
T E L E C O M
Secure OHVA
This option prevents your phone from receiving OHVA calls via the speaker, for privacy. Any OHVA call is broadcast via the handset
only when the SECURE OHVA option is turned on at your phone.
1.
Press the [Transfer] button.
2.
Dial [1][1][0]
3.
Dial [1][3][1] to switch Secure OHVA on, or [1][3][0] to switch it off
4.
Press the [Transfer] button to save settings.
CALL DURATION TIMER
The call timer is used to time the duration of external calls. It can also be manually set to time a call or as a simple stopwatch fea-
ture.
Setting Automatic Timer
If set, the timer appears on the LCD panel immediately for incoming calls, or when your call is answered after dialling an outgoing
call. It remains active during the call. The call duration is displayed in minutes and seconds, and is reset if the call lasts longer than
100 minutes.
1.
While on-hook, press the [Transfer] button.
2.
Dial [1][1][0].
3.
Dial [0][1][1] to activate the auto timer or [0][1][0] to deactivate it.
4.
Press the [Transfer] button to save settings.
Setting Manual Timer
To set the timer manually when on a call, you must have a programmed [TIMER] button. Press the button to start the timer, and
press it again to stop the timer.
1.
To start the timer while the phone is idle, press the [TIMER] button or select the TIMER option from the OTHER menu on
the LCD panel using the [Scroll] and soft buttons.
2.
Press the [TIMER] button again or select TIMER from the LCD panel to stop the timer and confirm the elapsed time dis-
played.
3.
Lift and replace the handset to return the phone to its normal LCD display.
STORING A CALLERS NUMBER
While you are on a call, you can store the number in memory by pressing the programmed [SAVE] button or selecting the SAVE
option from the CLIP menu on the LCD screen using the [Scroll] and soft buttons.
Calling a Stored Number
To redial a stored number, dial [1][7]
STORING A CALLERS NUMBER AS A SPEED DIAL NUMBER
You can store a caller’s number as a speed dial number in your personal speed dial list.
1.
Press the programmed [STORE] button, or select the STORE option in the CLIP menu on the LCD panel.
2.
You can view the speed dial number to which the number was stored by pressing the [Scroll] button
