5
T E L E C O M
PROGRAMMABLE BUTTONS LED INDICATORS
The programmable buttons, [Transfer] button, [Hold] button, and [Speaker] button have LEDs that light red, green or amber when
it is being used. The following table summarises the functions of LEDs.
PHONE STATUS INDICATOR
The status indicator is located on the upper right section of the LCD panel. It shows the status of the phone as described in the table.
USING FEATURE CODES
System features are programmed with default codes that you can dial to access the features. These are described in the relevant parts of
the guide. However, these codes may have been changed in programming; if so, you may find that a feature does not work as de-
scribed. In such cases, refer to your system administrator for the correct codes (or ask them to check with the installation technician
if they don’t know what they are).
SELECTING PROGRAMMED FUNCTIONS
The most convenient way to select functions on your phone is to have them registered on the programmable buttons, so that you
simply press the required button.Ifa functionisnotprogrammedonabutton, itcanbeselectedontheLCD panel using the Scroll button
and soft buttons.
An advantage of using the soft buttons for functions is that the programmable buttons can be used to assign more buttons for di-
rect extension selection and speed dialling.
Function
Button LED Status
External line or function is in use
LED is steady green.
New incoming call is ringing
LED is a fast flashing green
A call is on hold
LED is a slow flashing green or red
A held or transferred call is recalling to the phone
LED is a slow flashing amber
Status of Phone
Status Indicator
Busy on call / Off-hook
Steady red
Internal extension ring
Flashing red
External (C.O.) line ring
Flashing green
Transferred / held call recalling
Flashing amber
Message waiting
Flashing red
Calling denied
Fast flashing red
