English - 6
Audio Format → MPEG / Dolby Digital / Advanced
(digital channels only)
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed
difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
While viewing a digital channel, this function can be selected.
The
Audio Format
appears according to the broadcasting signal.
Audio Description (digital channels only)
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the
Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the
Audio Description On or Off and control the volume.
Audio Description → Off / On
Turn the audio description function on or off.
Volume
You can adjust the audio description volume.
Volume is active when
Audio Description
is set to
On
.
While viewing a Digital channel, this function can be selected.
Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
Speaker Select → External Speaker / TV Speaker
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The volume and
MUTE
buttons do not operate when the
Speaker Select
is set to
External Speaker
.
If you select
External Speaker
in the
Speaker Select
menu, the sound settings will be limited.
TV’s Internal Speakers
Audio Out (Optical, L/R Out) to Sound System
RF, AV, Component, PC, HDMI
RF, AV, Component, PC, HDMI
TV Speaker
Sound Output
Sound Output
External Speaker
Mute
Sound Output
Video No Signal
Mute
Mute
Sound Reset → Reset All / Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.
Reset Sound Mode
: Current sound values return to default settings.
Selecting the Sound Mode
You can set the sound mode in the
Tools
menu. When you set to
Dual l ll
, the current sound mode is displayed on the screen.
Audio Type
Dual / 2
Default
A2 Stereo
Mono
MONO
Automatic change
Stereo
STEREO ↔ MONO
Dual
DUAL 1 ↔ DUAL 2
DUAL
NICAM
Stereo
Mono
MONO
Automatic change
Stereo
MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
❑
N
N
❑
N
N
❑
❑
N
N
❑
N
¦
N
N
N
[650_Aus]BN68-02089G-01Eng.indb 16
2009-08-21 ¿ÀÈÄ 1:40:36
