english -
4
Setting the PC
Coarse and Fine tuning of the image (image lock):
the purpose of picture quality adjustment is to remove or
reduce picture noise.
if the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
.
Preset: Press the
SourCe
button to select PC mode.
.
Press the
menu
button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
enter/oK
button.
.
Press the ▲ or ▼ button to select "PC", then press the
enter/oK
button.
.
Press the
enter/oK
button to select "Image Lock".
.
Press the
▲ or ▼ button to select "Coarse" or "Fine", then
press the
enter/oK
button.
.
Press the
◄
or
►
button to adjust the screen quality.
Press the
enter/oK
button.
.
Press the
exit
button to exit.
Changing the image Position:
adjust the PC’s screen positioning if it does not fit the
tV screen.
.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
.
Press the ▲ or ▼ button to select "Position", then press the
enter/oK
button.
.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the
enter/oK
button.
.
Press the
exit
button to exit.
adjusting the PC Screen automatically (auto adjustment):
auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. the values of fine, coarse and
position are adjusted automatically.
.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
.
Press the ▲ or ▼ button to select "Auto Adjustment", then
press the
enter/oK
button.
.
Press the
exit
button to exit.
initializing the image Settings (image reset):
You can replace all image settings with the factory default
values.
.
Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
.
Press the ▲ or ▼ button to select "Image Reset", then press
the
enter/oK
button.
.
Press the
exit
button to exit.
tV
PC
image lock
Position
auto adjustment
image reset
move
enter
return
tV
PC
image lock
Position
auto adjustment
image reset
move
enter
return
tV
Position
move
enter
return
mode
: Custom
equalizer
SrS tSxt
: off
auto Volume
: off
internal mute
: off
reset
move
enter
return
tV
image lock
Coarse
0
Fine
0
move
enter
return
tV
PC
image lock
Position
auto adjustment
image reset
move
enter
return
BN68-01180A-01Eng-0320.indd 55
2007-03-20 �� 6:15:47
