English-15
You can set the TV’s clock so that the current time is displayed when you
press the INFO button. You must also set the time if you wish to use the
automatic On/Off timers.
1.
Press the
MENU
button to display the menu. Press the
or
button
to select “Setup”, then press the
ENTER
button.
2.
Press the
or
button to select “Time”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “Clock Set”.
4.
5.
Press the
EXIT
button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
To...
Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the
ENTER
button.
Press the...
or
button.
or
button.
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is high
or by raising the sound output when the modulation signal is low.
1.
Press the
MENU
button to display the menu. Press the
or
button
to select “Sound”, then press the
ENTER
button.
2.
Press the
or
button to select “Auto Volume”, then press the
ENTER
button.
3.
Press the
or
button to select “On” or “Off”.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Adjusting the Volume Automatically
Setting and Displaying the Current Time
BN68-000000-00Eng.qxd 9/1/06 11:45 AM Page 15
