English - 7
Configuring Picture Options
Activating Picture Options
1.
Press the
MENU
button to display the menu.
Press the
ENTER
button to select “Picture”.
2.
Press the �� or �� button to select “Picture Options”, then press the
ENTER
button.
Press the �� or �� button to select a particular item. Press the
ENTER
button.
When you are satisfie�� with your setting, press the
ENTER
button.
In PC mode, you can only make changes to the “Colour Tone” and “Size”
from among the items in “Picture Options”.
Colour Tone: Cool/Cool/Normal/Warm/Warm
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected “Picture” mode.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size: Auto Wide/6:/Wide Zoom/Zoom/:/just Scan
You can select the picture size which best corresponds to your viewing
requirements.
Auto Wide
: Automatically adjusts the picture size to the “16:9” aspect ratio.
6:
: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom
: Magnify the size of the picture more than 4:3.
Zoom
: Magnifies the 16:9 wi��e picture (in the vertical ��irection) to fit the screen size.
:
: This is the default setting for a video movie or normal broadcasting.
just Scan
: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component
(1080i) signals are input.
•
•
•
•
•
•
“Auto Wide” function is available only in “TV”, “Ext.1”, “Ext.2”, “AV”, and “S-Video” mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
“Wi��e Zoom”: Press the �� button to Select “Position”, then press the
ENTER
button. Press the �� or �� button
to move the screen up/down. Then press the
ENTER
button.
“Zoom”: Press the �� button to Select “Position”, then press the
ENTER
button. Press the �� or �� button to
move the picture up and down. Then press the
ENTER
button.
Press the �� button to Select “Size”, then press the
ENTER
button. Press the �� or �� button to magnify
or reduce the picture size in the vertical direction. Then press the
ENTER
button.
After selecting “just Scan” in HDMI (00i) or Component (00i) mode:
Select “Position” by pressing the �� or ��button. Use the ��, ��, �� or �� button to move the picture.
Reset
: Press the �� or �� button to select “Reset”, then press the
ENTER
button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
You can select these options by simply pressing the
P.SIZE
button on the
remote control.
Screen Mode: 6:/Wide Zoom/Zoom/:
When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so
this function is intended for users to select it.
6:
: Sets the picture to 16:9 wide mode.
Wide Zoom
: Magnify the size of the picture more than 4:3.
Zoom
: Magnify the size of the picture vertically on screen.
:
: Sets the picture to 4:3 normal mode.
•
•
•
•
This function is available in “Auto Wide” mode.
This function is not available in “PC”, “Component” or “HDMI” mode.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
➣
➣
Picture Options
Colour Tone
: Normal
��
Size
: Auto Wide
Screen Mode
: 16:9
Digital NR
: Auto
DNle
: Off
HDMI Black Level
: Normal
Blue Only Mode
: Off
Return
Enter
Move
Tint (G/R)
: G50/R50
Detailed Settings
Picture Options
►
Picture Reset
Picture
BN68-01424E-02Eng-0514.indd 27
2008-05-15 ¿ÀÀü 9:34:21
