English - 2
Audio Language
You can change the default value for audio languages. Displays the language information for the incoming stream.
While viewing a digital channel, this function can be selected.
You can only select the language among the actual languages being broadcast.
Audio Format → MPEG / Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
While viewing a digital channel, this function can be selected.
The “Audio Format” appears according to the broadcasting signal.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles
the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can
turn the Audio Description On or Off and control the volume.
Audio Description → Off / On: Turn the audio description function on or off.
Volume: You can adjust the audio description volume.
“Volume” is active when “Audio Description” is set to “On”.
While viewing a Digital channel, this function can be selected.
Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
Select Speaker → External Speaker / TV Speaker
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The volume buttons and
MUTE
buttons do not operate when the “Select Speaker” is set to “External Speaker”.
If you select “External Speaker” in the “Select Speaker” menu, the sound settings will be limited.
TV's Internal Speakers
Audio Out (Optical) to Sound System
RF / AV / S-Video / Component / PC / HDMI
RF / AV / S-Video / Component / PC / HDMI
TV Speaker
Speaker Output
Sound Output
External Speaker
Mute
Sound Output
Video No Signal
Mute
Mute
Sound Select
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Press the
TOOLS
button to display “Tools” menu. You can also set the sound of the sub picture by selecting “Tools → PIP
→ Sound Select”.
Sound Reset
Reset All / Reset Sound Mode / Cancel:
You can restore the Sound settings to the factory defaults.
❑
N
N
❑
N
N
❑
N
N
❑
❑
N
N
❑
T
❑
BN68-01737B-ENG.indb 21
2008-09-10 �� 10:38:58
