64
For the S9 models
Plug the cable into the One Connect IR connector and then point the transmitter at the other end of
the cable towards the external device's remote panel receiver. However, there can' be any obstacles
between the IR extension cable and the external device. The presence of an obstacle will interfere with
the transmission of the remote panel signal.
"
The colour and design of the IR Extender may vary depending on the model.
Add the External Device
11
Turn on the external device you wish to set up universal remote function for and then press
SOURCE
to bring up the
Source
screen.
21
Select
Universal remote setup
from the top of the screen. This initiates the universal remote
setup process.
31
Follow the on-screen instructions for the Universal remote setup. If it does not respond properly,
set up the remote control by entering the model number manually.
Using the Universal Remote Control
By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.
