Español -
Configuración de Anynet
+
Parámetros para usar las funciones .
uso de la función
.
Pulse el botón .
Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación,
pulse el botón
EntEr
.
.
Pulse el botón
EntEr
para seleccionar Control HDMI y, a continuación, pulse el
botón
EntEr
..
,
Pulse los botones ▲ o ▼ para seleccionar Activado y, a continuación, pulse el botón
EntEr
.
La función Control HDMI está activada.
Si selecciona
desactivado
, Control HDMI se desactiva.
apagado automático de un dispositivo cuando el televisor está apagado
.
Pulse los botones ▲ o ▼ para seleccionar Desact. auto.; a continuación pulse el
botón
EntEr
.
.
Pulse los botones ▲ o ▼ para seleccionar Sí y, a continuación, el botón
EntEr
.
La función Desact. auto. se activa.
Si selecciona No se cancela la función de apagado automático.
Pulse el botón
ExIt
para salir.
Para usar la función , el valor Seleccionar dispositivo del mando a distancia
debe ajustarse en TV.
Si establece Auto Turn Off (Desact. auto) en Sí, los dispositivos externos conectados también se desactivan cuando se apaga
el televisor. Sin embargo, si el dispositivo está grabando es posible que no se apague.
Cuando la función (HDMI-CEC) está desactivada, todas las operaciones relacionadas con se desactivan.
Búsqueda y cambio de dispositivos Anynet
+
.
Pulse el botón
.
Se muestran todos los dispositivos conectados al televisor.
.
Pulse los botones ▲ o ▼ para seleccionar el dispositivo que desee y pulse el botón
EntEr
.
Se cambia al dispositivo seleccionado.
.
Si no encuentra el dispositivo que desea, pulse los botones ▲ o ▼ para seleccionar
Searching Connections (Buscando conexiones) y pulse el botón ENTER.
Aparece el mensaje Configuring connection... (Configurando conexión
...). Cuando finaliza la búsqueda de dispositivos, los dispositivos conectados
aparecen en el menú .
El cambio a los dispositivos seleccionados puede tardar unos 2 minutos. No se puede
cancelar la operación de cambio de dispositivo mientras ésta se está efectuando.
El tiempo necesario para la búsqueda de dispositivos depende de la cantidad de
dispositivos conectados.
Cuando finaliza la búsqueda de dispositivos, no se muestra el número de dispositivos
encontrados.
Aunque el televisor explora automáticamente los dispositivos cuando se enciende con el botón POWER, los dispositivos
conectados cuando el televisor está encendido o en algunas circunstancias determinadas no aparecen en la lista de
dispositivos. Por consiguiente, debe seleccionar el menú Buscar conexiones para buscar los dispositivos.
Si ha seleccionado el modo de entrada externa pulsando el botón SOURCE, no podrá usar la función . Asegúrese de
cambiar al dispositivo mediante el botón .
Configuración
Control HdmI
: off
apagado automático
: off
Buscando conexiones
Ingresar
regresar
mover
apag.
Enc.
Ingresar
mover
Grabar:
Enc.
Conectar recorder
Configuración
Air 28
salir
Configuración
Control HdmI
: apag.
apagado automático
: off
Buscando conexiones
Ingresar
regresar
mover
no
sí
Ingresar
salir
mover
Grabar:
Enc.
Conectar recorder
Configuración
air
Configuración
Control HdmI
: apag.
apagado automático
: sí
Buscando conexiones
Ingresar
regresar
mover
BN68-01178A-Spa.indd 78
2007-02-15 �� 9:29:51