English - 28
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 X 350
31.469
70.086
25.175
+/-
720 X 400
31.469
70.087
28.322
-/+
MAC
640 X 480
35.000
66.667
30.240
-/-
832 X 624
49.726
74.551
57.284
-/-
1152 X 870
68.681
75.062
100.000
-/-
VESA CVT
720 X 576
35.910
59.950
32.750
-/+
1152 X 864
53.783
59.959
81.750
-/+
1280 X 720
44.772
59.855
74.500
-/+
1280 X 960
75.231
74.857
130.000
-/+
1280 X 720
56.456
74.777
95.750
-/+
VESA DMT
640 X 480
31.469
59.940
25.175
-/-
640 X 480
37.861
72.809
31.500
-/-
640 X 480
37.500
75.000
31.500
-/-
800 X 600
37.879
60.317
40.000
+/+
800 X 600
48.077
72.188
50.000
+/+
800 X 600
46.875
75.000
49.500
+/+
1024 X 768
48.363
60.004
65.000
-/-
1024 X 768
56.476
70.069
75.000
-/-
1024 X 768
60.023
75.029
78.750
+/+
1152 X 864
67.500
75.000
108.000
+/+
1280 X 1024
63.981
60.020
108.000
+/+
1280 X 1024
79.976
75.025
135.000
+/+
1280 X 800
49.702
59.810
83.500
-/+
1280 X 800
62.795
74.934
106.500
-/+
1280 X 960
60.000
60.000
108.000
+/+
1360 X 768
47.712
60.015
85.500
+/+
1440 X 900
55.935
59.887
106.500
-/+
1440 X 900
70.635
74.984
136.750
-/+
1680 X 1050
65.290
59.954
146.250
-/+
VESA GTF
1280 X 720
52.500
70.000
-
-/+
1280 X 1024
74.620
70.000
128.943
-/-
VESA DMT /
DTV CEA
1920 X 1080p
67.500
60.000
148.500
+/+
When using an HDMI / DVI cable connection, you must use the
HDMI IN 1
jack.
Setting up the TV with your PC
Preset: Press the
SOURCE
button to select PC mode.
Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
Press the
TOOLS
button to display the
Tools
menu. You can also set the Auto Adjustment
by selecting
Tools → Auto Adjustment.
This function does not work in DVI-HDMI mode.
Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ►button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
N
¦
N
❑
T
N
❑
Brightness
: 45
Sharpness
: 50
Auto Adjustment
►
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
BN68-01883A-01Eng.indb 28
2009-01-30 �� 10:36:17
