background image

6

Warning

 

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT 
INSTALL THE PRODUCT NEAR HEAT SOURCES.

 

Do not install the product in poorly ventilated spaces such as a bookcase or closet.

 

Install the product at least 10 cm away from the wall to allow ventilation.

 

Keep the plastic packaging out of the reach of children.

 

Children may suffocate.

 

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)

 

The product may fall and become damaged and/or cause an injury.

 

Using the product in an area with excess vibration may damage the product or cause a fire.

 

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or 
smoke.

 

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

 

The product lifespan may be reduced or a fire may result.

 

Do not install the product within the reach of young children.

 

The product may fall and injure children.

 

Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil 
pollution. And do not install or use the product in the kitchen or near the kitchen stove.

Caution

 

Do not drop the product while moving.

 

Do not set down the product on its front.

 

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of 
the product is not protruding.

 

The product may fall and become damaged and/or cause an injury.

 

Install the product only on cabinets or shelves of the right size.

 

Set down the product gently.

 

Product failure or personal injury may result.

 

Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical 
substances, extreme temperatures or a significant presence of moisture, or a place where 
the product will operate continuously for an extended period of time) may seriously affect its 
performance.

 

Be sure to consult Samsung Customer Service Center if you want to install the product at such a 
place.

Installation

Summary of Contents for LU32J590UQU

















































Reviews: