background image

4-7

Chapter 4. Connecting to the Internet 

Configuring the Network Environment Settings for
Wireless LAN Network 

(WLAN)

A wireless network (Wireless LAN) environment is a network environment

that enables communication between multiple computers at home or a

small-size office through wireless LAN devices.
When a computer-to-computer network has been established, a comput-

er that is not connected to the Internet can share the Internet by accessing

another computer connected to the Internet.  

(See P. '4-17. Sharing Internet Access')

Wireless network connections can be classified into two categories.

1) Access Point 

You can connect to an AP to use the network. This is possible only in an environ-
ment equipped with an AP. (See P. 4-8, ‘Connecting to an Access Point (AP)’)

2) Computer–to-computer (ad hoc)

This is also called a peer-to-peer network.
In computer-to-computer wireless networks, you can wirelessly connect 2 or more
computers that have wireless LAN modules. (See P. 4-9, ‘Connecting to 
computer-to-computer networks (peer-to-peer or ad hoc)’).

The description in this section refers to the Intel(R) PRO/Wireless 3945ABG
Network Connection (hereafter referred to as an 802.11ABG card) device.
A wireless LAN card is optional. The model of the wireless LAN card is 
determined by the relevant product.
To view the installed wireless LAN card, click Start > Control Panel > Performance
and Maintenance > System > Hardware tab > Device Manager.
The wireless LAN connection settings will be described on the basis of the
Windows XP Service Pack 2 installed computer.
It is recommended using the default settings provided by Windows XP for the
wireless LAN settings for Windows XP installed computers. To setup using the 
software supplied by the wireless LAN card manufacturer, refer to p.4-13 ‘Using
a wireless Network with the Wireless LAN Setting Program’.
To use the wireless network, you have to turn on the wireless LAN function by
using the Wireless LAN On/Off Button.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

  

  

What is an Access Point (AP)?

An AP is a network device that bridges wired and wireless LANs, and 
corresponds to a wireless hub in a wired network. You can connect multiple 
wireless LAN installed computers to an AP.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

  

  

 

m55-hk_ch4  2006.2.7 9:4 AM  페이지7   1000 Dolev-1524-Mono-S  T

Summary of Contents for M55


































































































































































Reviews: