59
or
% /sbin/init.d/pcmcia restart (in case of Suse distributions)
or
% /etc/rc.d/rc.pcmcia restart(in cse of Slackware distributions)
7) Extract the Utility distribution archive into local directory.
% tar xzvf configlinux-0.2.tar.gz
8) Build and install the Uility package.
% cd configlinux-0.2
% ./configure
(if you use the redhat 6.2 or later, please type like this.
% ./configure --with-qt-dir=/usr/lib/qt-1.45)
% make
% make install
% make clean
9) There is a link(configlinux) in the Applications of the KDE menus.
% configlinux or configlinux eth0
10) To use wireless extension,please get the package at.
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
3. Troubleshooting
=======================================================
When the SAMSUNG 11Mbps PC Card is inserted, the card manager will emit
beeps in different tones to indicate success or failure of particular
configuration steps.
a) Two high beeps
- The card was identified and configured successfully.
b) One high beep followed by a low beep
- The card was identified, but could not be configured.
- Examine the system log (dmesg) for PCMCIA error or warning
messages.
c) One low beep
- The card could not be identified.
- Execute "cardctl ident" to display the adapter PnP information.
Verify the PnP information matches an entry in the PCMCIA
configuration file (/etc/pcmcia/config).
- Examine the system log (dmesg) for PCMCIA error or warning
messages.
The SAMSUNG 11Mbps PC Card has one LED that indicate the state of the
Summary of Contents for MagicLAN SWL-2200C
Page 1: ...1 SAMSUNG MagicLAN SWL 2200C User Manual Rev 1 4 ...
Page 21: ......
