Samsung MAX-C570, Service Manual

Samsung Electronics

3-7

The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.

Before setting the timer, check that the current time is cor-

rect.

For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.

Switch the system on by pressing 

STANDBY/ON

.

Press 

TIMER/CLOCK

until       

TIMER

is displayed.

Press 

ENTER

.

Result:

ON TIME

is displayed (instead of the equalizer symbols)

for a few seconds, followed by any switch-on time already
set; you can set the timer switch-on time.

Set the timer switch-on time.

a

Set the hour by pressing the

/ buttons.

b  

Press 

ENTER

.

Result: The minutes flash.

c 

Set the minutes by pressing the

/ buttons.

d

Press 

ENTER

.

Result:

OFF TIME

is displayed (instead of the equalizer sym-

bols) for a few seconds, followed by any switch-off time
already set; you can now set the timer switch-off time.

Set the timer switch-off time.

a

Set the hour by pressing the

/ buttons.

b

Press 

ENTER

.

Result: The minutes flash.

c

Set the minutes by pressing the

/ buttons.

d

Press 

ENTER

.

Result:

VOL XX

is displayed, where 

XX

corresponds to the vol-

ume already set.

Press 

DOWN

and 

UP

to adjust the volume level and

press 

ENTER

.

Result: The source to be selected is displayed.

pressing the

/ 

buttons to select the source to be played

when the system switches on .

If you select...

You must also...

TAPE (cassette)

Insert a recorded cassette in one of the
decks before setting the system to stand-
by.

TUNER (radio)

a 

Press 

ENTER

.

b 

Select a preset station by 

pressing the

/ buttons.

CD (compact disc)

Load one or more compact discs.

Press 

ENTER

to confirm the timer.

Press 

STANDBY/ON

to set the system to standby mode.

Result:

appears on the front panel display next to the time, indi-

cating the timer has been set. The timer automatically turns
the system on or off at a designated time.

If the timer switch on and off times are identical, the word 

ERROR

is displayed.

Timer Function

COUNT

 RESET

7

8
9

5

6

1
2
3

4

1,9

2

3,4,5,6,7,8

After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...

Press TIMER ON/OFF...

Cancel the timer

Once.
Result:

is no longer displayed.

Restart the timer 

Twice.
Result:

is displayed again.

Cancelling the Timer

4,5,6,7

4,5,6,7

To set the timer function

You may use 

TUNING ALBUM

or 

on the remote control 

to adjust in step 

4

, 

5

, 

6

, 

7

.