Samsung MAX-DA54 User Manual Download

Page: 27 / 35

ENG

Recording a Radio Program

You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.

Insert a blank
cassette in Deck 2.

Switch the system
on by pressing
STANDBY/ON.

•

REC

is displayed and recording

starts.

Select the FM
function by
pressing
FM/TUNER.

Press REC/PAUSE
button.

To stop recording,
press button.

Select the radio
station that you wish
to record by pressing

I<<,>>I

button .

STANDBY/ON

MULTI JOG

TUNER

DVD/CD

TAPE

AUX/USB

1/2

OPEN/

Don’t disconnected USB and AC Cord during CD-Ripping.This may cause the file
damage.If you want to stop CD-Ripping during CD-Ripping,you must press stop Key
first and after the CD Stopped,then you can remove the USB device.

If you disconnected USB device when CD Ripping,the main unit will be power off and
you may not delete the ripped file,In this case, please connect the USB on the PC and
backup the USB data on the PC first and then formate the USB device .

On the CD playing ,connect the USB,the CD play will be paused and will resume

playing till the USB initilization finished.

According the different USB the initilization time maybe different.

When the USB memory is not enough,it will be displayed “NOT ENOUGH MEMORY”

DTS-CD can’t for CD Ripping.

Starting CD ripping within 5 seconds can’t create the CD Ripping file.

Ripping file is only created when CD Ripping is stopped afters 5 seconds(ex.

SAM_0001.MP3).

With external HDD,FAT format the USB can be CD Ripping,but not NTFS.The CD

Ripping function of this product does not support all USB devices.

When you use CD high speed search function,the CD Ripping can’t work.

When CD Ripping, CD audio can’t be out.

During CD Ripping,do not deal impact.If is shocked while CD Ripping,CD Ripping

maybe disengage.

Sometimes, some of USB devices, CD Ripping time is long.

APE DECK

CD RIPPING Function

You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.

Connect the
USB.

Switch the system
on by pressing
STANDBY/ON.

Load a compact
disc(Digital
Audio).

Press CD

RIPPING button

on remote control

to starting ripping.

Press the OPEN/CLOSE button to open
the CD door.

Insert a CD and press the OPEN/CLOSE
button to close the CD door.

Use the CD selection (

I<<,>>I

) buttons to

select the desired song.

If the system is either at pause or playing state,turn
the CD RIPPING dial down or press CD RIPPING
button on the remote control to start the ripping for
the current track.
Turn CD RIPPING dial up or press and hold CD
RIPPING button on the remote control to start
ripping the all tracks of Disc.
“CD Ripping” is displayed in red and CD RIPPING

starts.

During CD ripping, do not disconnect USB device.

To stop ripping, press

STOP

button.and

then automatically

create and save as

the MP3 file.

After CD-Ripping,a directory named
“RIPPING” will be created in your device.The
file name follows the
format:”SAM_XXXX”.MP3.

OPEN/
CLOSE

DISC SKIP

POWER