15
16
Disc Playback
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
DVD
VCD
CD
•
Playback starts automatically.
MP3
JPEG
•
Playback starts automatically.
•
If the TV is on, a list of MP3s on
the CD will appear on the TV
screen.
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER SMART NAVI
Note
•
To resume playback, press
PLAY/PAUSE
button again.
To temporarily pause playback,
press
PLAY/PAUSE
during playback.
•
If pressed once, “
PRESS PLAY
” is displayed and the
stop position will be stored in memory. If
PLAY/PAUSE
( ) button or
ENTER
button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE
( ) button is pressed, playback
starts from the beginning.
To stop playback,
press
STOP
during playback.
DivX
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK
once.
•
CLOCK
is displayed.
2
Press
TIMER/CLOCK
twice.
1
Switch the system
on by pressing
POWER
button.
•
"
TIMER
" appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press
ENTER
.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press
ENTER
.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press
ENTER
.
The hour flashes.
Note
Checking the Remaining Time
CHAPTER REMAIN
TITLE REMAIN
CHAPTER ELAPSED
TITLE ELAPSED
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN
TRACK ELAPSED
TRACK REMAIN
TRACK ELAPSED
Each time the REMAIN button is pressed
Press the REMAIN button.
•
For checking the total and remaining time of a title or chapter being played.
DVD
CD
VCD
MP3
PREP
ARA
TION
To select a specific disc, press the corresponding
DISC (1, 2, 3)
button on the front panel or
DISC SKIP
on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
The
CD
function is automatically selected when Disc Skip is pushed.
Selecting a CD in the Disc changer
•
If you use the
DISC (1, 2, 3)
function when listening to the radio or to a tape, the
system switches automatically to the CD mode.
•
If the disc selected is not loaded, the next disc is played automatically.
•
You can also use Muti-Jog or button on the panel front
instead of , buttons in step 3,4.
Note
