GB
3
6
The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock until
TIMER
is displayed.
Press Enter.
Result:
ON TIME
is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result:
VOL XX
is displayed, where
XX
corresponds to the vol-
ume already set.
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to standby.
TUNER (radio)
a Press
Enter.
b Select the FM or AM frequency band by
tuning the
Multi Jog knob to the right or
to the left.
c Press
Enter.
d Select a preset station by tuning the
Multi Jog knob to the right or to the left.
CD (compact disc)
a Load one or more compact discs.
b Select the required disc.
Press Enter to confirm the timer.
Press On/Standby to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR
is
displayed.
Press REC LOCK (recording protection) button.
When
REC Lock
(recording protection) lamp is lighted up all
of the buttons are not activated. (
Volume, Demo
key is acti-
vated.)
It is a function that the recording stop is prevented by other
button action during recording.
REC Lock
(recording protection) is activated only during
recording.
When the
REC Lock
is on (the lamp is on), do not open the
cassette door.
When releasing, press
REC Lock
button once again.
Timer Function
For the Protection of being Recorded
On/Standby
Demo
TUNER
DVD/CD
TAPE
AUX
+
–
Volume
Band
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
REV. Mode
Normal
TAPE
TAPE REC
HI-Speed
REC/Pause
REC Lock
Tuning Mode
Down
Up
DOLBY DIGITAL
R
Su
rro
un
d
Do
lby
S
. B
as
s
D
S
P
/E
Q
P/
So
un
d
En
te
r
Timer
On/Off
Timer
/Clock
MIC Mixing
MIC1
MIC2
Echo
TUNER
DVD/CD
TAPE
Band
Mono/ST
Memory
CD Synchro
Display
Deck 1/2
REV. Mode
Normal
TAPE
TAPE REC
HI-Speed
REC/Pause
es
REC Lock
Tuning Mode
Down
Up
7
8
9
5
6
1
2
3
4
3,4,5,6,7,8
2
1,9
6
6
4,5,7
