GB
13
B
12
Several options are available during DVD playback.
Stopping Playback
Press the
Stop
button in playback.
Removing Disc
Press the
Open/Close
(
)button
Pausing Playback
Press the
Play/Pause
or
Step
button on the remote during
playback.
– Screen stops, no sound.
– To resume again, press
Play/Pause
button once again.
Step Motion Playback (Except CD)
Press the
Step
button on the remote during playback.
– Each time the button is pressed, a new frame will appear.
– No sound is heard during STEP mode.
– Press
Play/Pause
to resume normal playback.
(You can only perform step motion playback in the forward direction.)
Slow Motion Playback (Except CD)
Press the
FWD
(
) or
REV
SEARCH (
) button on the
remote during PAUSE or STEP mode.
– By pressing or shuttling, you can select slow motion playback for
1/8, 1/4 or 1/2 of normal speed.
– No sound is heard during slow mode.
– Press
Play/Pause
to resume normal playback.
– When playing a VCD, the reverse slow motion playback will not work.
Playing a Disc (Cont'd)
The CD function is automatically selected when DISC SKIP is
pushed.
To select a specific disc, press the corresponding
Disc (1, 2, 3)
button
on the front panel or
Disc Skip
on the remote control, until the
required disc indicator flashes.
If you use the
Disc (1, 2, 3)
function when listening to the
radio or to a tape, the system switches automatically to the
DVD/CD mode.
If the disc selected is not loaded, the next disc is played auto-
matically.
Selecting a Disc in the CD changer
1
2
3
4
5
DVD/CD
DECK
Open/Close
Digital
3D Sound
Power Sound
S.Bass
Disc Skip
Deck 1/2
Band
Clear
Repeat
Program
EQ
Mute
10/0
1
2
3
4
5
6
7
8
9
Sleep
Repeat
A B
Title
Angle
Audio
Display
Set up
Book Mark
Menu
Zoom
Step
Enter
Timer On/Off
Step
1
3,4,5
3,4,5
2
5
When you stop disc play, the player remembers where you stopped,
so when you press
Play
again, it will pick up where you left off
(unless the disc is removed, the
Stop
button is pressed twice or the
player is unplugged.).
If the player is left for 5 minutes in pause mode, it will stop.
If the player is left in the stop mode for more than one minute
without any user interaction, a screensaver will be activated, and
the TV screen will fade in and fade out repeatedly. Press
Play
but-
ton to resume normal play.
RESUME function
Playback
Press the
Open/Close
(
) button.
Place a disc gently into the tray with the disc's label facing up.
Press the
Play/Pause
button or
Open/Close
(
) button to close the
disc tray.
Press the
3-D Sound
button in POWER OFF, then it is converted to
“ ” and select the TYPE you want.
Example : Select PAL, if TV is for PAL.
When disk is set to NTSC in PAL, it doesn't operate.
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “
Precautions When Using Compact Discs
” on
page 39
.
Switch the system on by pressing
On/Standby
.
Press the
Open/Close
(
) button on the front panel.
Result: The compartment opens.
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to load a third compact disc, press the
Disc Change
but-
ton on the front panel (or
Disc Skip
on the remote control).
Result: The carrousel rotates by 120°.
Close the compartment by pressing the
Open/Close
(
) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Press...
Disc 1
DVD/CD (
) or DISC 1
Disc 2
DISC 2
Disc 3
DISC 3
Result: The compartment closes automatically and the disc selected
starts playing.
To change or unload the compact disc changer, repeat Steps
2
to
5
.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Playing a Disc
Video Output Selection
1
2
3
Loading and Changing Compact
Discs
1
2
3
4
5
6
NTSC
PAL
SECAM
Disc1
Disc2
Disc3 Disc Change
Open/Close
On/Standby
Demo
Timer/
Clock
RDS
PTY
Display
Mono/ST.
Display
Counter
Reset
Down
Tuning Mode
Up
Band
R
TUNER
DVD/CD
TAPE
AUX
Memory
REV.Mode
Multi Jog
Volume
EQ
S.Bass
3-D Sound Power Sound
Enter
Communication
DVD/CD
5
1
5
2,5
4
Disc1
Disc2
Disc3 Disc Change
Open/Close
Down
Tuning Mode
Up
Band
R
TUNER
DVD/CD
TAPE
AUX
Multi Jog
Volume
EQ
S.Bass
3-D Sound Power Sound
Communication
DVD/CD
1,3
3
Disc1
Disc2
Disc3 Disc Change
Open/Close
3-D Sound Power Sound
Counter
Reset
Down
Tuning Mode
Up
Band
R
TUNER
DVD/CD
TAPE
AUX
Memory
REV.Mode
Multi Jog
Volume
EQ
S.Bass
3-D Sound Power Sound
Communication
