GB
28
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 3.5 ø jack or an appropriate adapter.
Connect the headphones to the Phones jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
Press Sleep.
Result: playback starts and the following indications are displayed:
Press Sleep one or more times to indicate how long the system
should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing Sleep
Change the remaining time by repeating Steps 1 and 2
To cancel SLEEP function, press Sleep one or more times until
OFF
is displayed.
Setting the System to Switch off
Automatically
Connecting Headphones
1
2
3
90 MIN
The microphone enables the user to mix in his or her vocals to
sing-along with the music.
Preparation
Plug the microphone with a 6.3mm mic jack into microphone terminal.
Turn the MIC Level switch to adjust the MIC1, MIC2 volume.
The power sound function are not available if plugging the
microphone into MIC jacks.
Microphone Function (option)
1
Y
our mini-compact system has a bass amplification function
called S.Bass (Super Bass Sound). This function makes the
sound more powerful and real.
Press the S.Bass button on the front panel.
Result:
S. BASS
is displayed and “SBS ON” is displayed for a few
seconds.
To cancel this function, press S.Bass again, “OFF” is displayed for a
few seconds.
1
2
Super Bass Sound
1