10
GB
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and
closing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “
Precautions When Using Compact Discs
” on
page 24
.
Switch the system on by pressing STANDBY/ON.
Press the OPEN/CLOSE(
) button on the front panel.
Result: The compartment opens.
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to load a third compact disc, press the DISC CHANGE
button on the front panel (or DISC SKIP on the remote control).
Result: The carrousel rotates by 120°.
Close the compartment by pressing the OPEN/CLOSE(
) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Press...
Disc 1
CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
This unit has been designed to playback the CDs: Audio CD,
CD Text, CD-R and CD-RW.
When you have loaded at least one compact disc into the
player, you can start listening to it.
Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the unit.
Switch the system on by pressing Standby/on.
Select the CD function by pressing CD (
) .
Load one or more discs.
Press CD (
) on the front panel or
on the remote control.
If you have loaded more than one compact disc, they will
be played in turn.
Adjust the volume as required by:
Turning the VOLUME knob on the front panel
or
Pressing the or - buttons on the remote control
To pause temporarily during playback, press CD (
).
Press CD (
) again to continue disc playback.
Press
when you want to stop playback.
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compartment by
pressing
Disc Change
and load new discs in the other two
vacant slots (not the one containing the disc that you are play-
ing). You cannot rotate the carrousel during playback.
When no discs are loaded, the
“NO DISC”
indication is dis-
played.
The CD player stops automatically after playing the three discs, if
the CD REPEAT function has not been selected.
Loading and Changing Compact
Discs
1
2
3
4
5
6
1
5
5
4
2,5
1
2
3
4
5
6
7
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable)and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
You can play back your original CD-Rs or CD-RWs recorded
in music CD format.(However,they may be played back
depending on their characteristics or recording conditions.)
Before playing back CD-Rs or CD-RWs, read their instructions
or caution carefully.
Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them,or if the player’s lens is dirty.
CD-RWs may require a longer readout time.(This is cause
by the fact that reflectance of CD-RWs is lower than for
regular CDs.)
1
2,4,6
7
5
Listening to a Compact Disc
MAX-J530 GBR 1~15 2/11/04 3:39 PM Page 10
