10
•
Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
•
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
•
Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one of three video connection methods.
Directions in Installing Speaker
Connecting to a TV
Method 1
Using Video Out (Good Quality)
Connect Video Out on the player to Video
In on your TV.
1
CONNECTIONS
Press the TV/VIDEO button on the remote
of TV control to set the TV to "VIDEO".
2
Connect the connecting jacks (2) to the back of mini-compact system.
Make sure the polarities (+and -) are correct.
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Speakers
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be
at the same height as your ear.
Position of the DVD Player
•
Place it on a stand or cabinet shelf,
or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
R
L
Method 2
Scart ...............
Better Quality
• Composite Video: A single video signal that is a composite of the black-
and-white information (Y) and the color information (C).
Note
If you television is equipped with an SCART input,
connect an Scart Jack (not supplied) from the AV
OUT jack on the back panel of the system to the
SCART IN jack on your television.
For using the SCART cable
• If Scart is equipped for your TV, set RGB-COMPOSITE
selector of the unit to right( RGB mode). You can get a better
picture quality by using Scart setting.
• If Scart (RGB Input) is not equipped for your TV,
set RGB-COMPOSITE,selector of the unit to left, selector to
COMPOSITE.
COMPOSITE
RGB
EXT
(TV)
(supplied)