63
64
Press REVERSE MODE until the appropriate
symbol is displayed.
•
:
One side of the selected cassette and then stops.
•
:
One side of the cassette.
The other side of the cassette and then stops.
•
:
Both sides of the cassette indefinitely until you
press stop.
•
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
•
Each cassette deck has a separate counter.
REVERSE
MODE
SCK
REVERSE
MODE
K &
DVD PLAYBSCK
Your micro component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. (TAPE 2 only).
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
Selecting the Cassette Playback Mode
Tape Counter
T
APE DECK
Coping a Cassette(Dubbing)
AUX
1
2
3
4
5
RESERVE
CANCEL
DVD-OK
DVD-OK &
DVD PLAYBSCK
Y
ou can copy a cassette from Tape 1 to Tape 2.
•Normal speed dubbing in selecting Tape function mode.
•You do not need to adjust the volume, as it has no effect on the recording.
•Take care not to insert the tape to be copied in Tape 2, as it will be erased when
you start recording.
2
1
3
Insert a blank
cassette in Tape 2.
Switch the system
on by pressing
STANDBY/ON.
5
4
Insert the tape to
be copied in Tape1.
Press
STOP button.
Press DUBBING
button to copy a
cassette.
The appropriate indications
are displayed and the
cassette in Tape 1 is copied
to the cassette in Tape 2.