13
Connecting the FM, AM(MW) and Antennas
FM Antenna (supplied)
AM Loop Antenna
(supplied)
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
14
FM antenna connection
AM
(MW)
antenna connection
1. Connect the FM antenna supplied to the FM 75
Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75
Ω
coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
1
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting an External Analog Component
Connecting External Components
AUX
1
2
3
4
5
6
7
8
9
0
RESERVE
CANCEL
REVERSE
MODE
DVD-OK
DVD-OK &
DVD PLAYBSCK
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
Press AUX to select AUX.
•
‘
AUX
’ appears in the display.
2
CONNECTIONS
(not supplied)