Samsung MAX-VS6250 Instruction Manual Download

Page: 22 / 28

The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.

Switch the system on by pressing Standby/On.

Press Timer/Clock until

TIMER

is displayed.

Press Enter.
Result:

ON TIME

is displayed (instead of the equalizer symbols) for

a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.

Set the timer switch-on time.

Set the hour by pressing the

buttons.

b Press Enter.

Result: The minutes flash.

c Set the minutes by pressing the

buttons.

Press Enter.
Result:

OFF TIME

is displayed (instead of the equalizer symbols)

for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.

Set the timer switch-off time.

Set the hour by pressing the

buttons.

Press Enter.
Result: The minutes flash.

Set the minutes by pressing the

buttons.

Press Enter.
Result:

VOL XX

is displayed, where

corresponds to the vol-

ume already set.

Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.

pressing the

buttons to select the source to be played

when the system switches on .

If you select...

You must also...

TAPE (cassette)

Insert a recorded cassette in one of the
decks before setting the system to standby.

TUNER (radio)

a Press

Enter.

b Select a preset station by

pressing the

buttons.

VCD/CD (compact disc)

a Load one or more compact discs.
b Select the required disc.

Press Enter to confirm the timer.

Press Standby/On to set the system to standby mode.
Result:

is displayed to the bottom left of the time, indicating that

the timer has been set. The system will switch on and off automati-
cally at the required times.

If the timer switch on and off times are identical, the word

ERROR

displayed.

Timer Function

8
9

1
2
3

1,9

4,5,6,7

3,4,5,6,7,8

4,5,6,7

MAX-VS6250 GB-19~27 4/28/03 14:27 Page 22

Summary of Contents for MAX-VS6250





























Search results

Summary of Contents for MAX-VS6250

Reviews:

Related manuals for MAX-VS6250

Brands by name

Popular brands

Samsung MAX-VS6250, Instruction Manual

Search results

Summary of Contents for MAX-VS6250

Reviews:

Related manuals for MAX-VS6250

Brands by name

Popular brands