English 13
Oven use
Checking that your oven is operating correctly
The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section entitled
“
-
70
.
NOTE
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W)
is used, the water takes longer to boil.
Open the oven door.
Place a glass of water on the turntable. Close the door.
Press the
START/+30s
button and set the
time to 4 or 5 minutes, by pressing the
START/+30s
button the appropriate number
of times.
The oven heats the water for 4 or
5 minutes. The water should then be boiling.
Setting the time
Your microwave oven has an inbuilt clock. When power is supplied, “88:88” and
then “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-
hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
1
1.
Press the
Clock
button.
2
2.
Press the
Up
or
Down
button to set
time display type (12H or 24H). At that
time, press the
Select
button to set the
display type.
3
3.
Press the
Up
or
Down
button to set the
hour.
4
4.
Press the
Select
button.
DE68-04351D-01_MW5000H_TL_EN.indd 13
DE68-04351D-01_MW5000H_TL_EN.indd 13
2023-03-30 오후 5:31:21
2023-03-30 오후 5:31:21