13
ENGLISH
Installation settings
•
The menu of settings on installation is only for a certified installer.
CAUTION
1.
Network & Tracking
f
f
Touch Centralized Controller explores installation information and status information of the devices which form the
system for 10 minutes. To use this function, you need user authentication.
f
f
In addition, you can select Show / Hide(
) for the device that has completed the tracking. You can also hide the device
which is found during the tracking with the Hide function.
•
When performing the tracking for the first time, all devices will be included in one zone.
•
The zone information edited by a user will be maintained even if you perform the tracking.
CAUTION
2.
Data backup & restoration
f
f
Save all user information of a Touch Centralized Controller to a SD card and restore the information from this data.
f
f
For the data restoration, you need user authentication.
•
When using the function of the data backup or data restoration, you need to insert the SD card to the Touch
Centralized Controller.
CAUTION
3.
Device settings
f
f
You can allow the control of a On/Off controller with a remote controller from Touch Centralized Controller and can
change the communication address of the Touch Centralized Controller.
4.
System Initialization
f
f
You can delete all user information of Touch Centralized Controller. To use this function, you need user authentication.
Device Information
1. Version information: The version information of the Touch Centralized Controller is displayed.
2. For the information of open source, refer to [Setting]-[Device Information].
Touch-con_IB_03944A_2_EN.indd 13
2013-10-07 오후 2:11:31
