17
Step-by-step installation guide
1
. Lift the microwave, tilt it
forward, and hook the slots
at the back bottom edge
onto the four lower tabs of
the mounting plate.
2
. Rotate the front
of the oven
up against the
cabinet bottom.
3
. Insert a self-aligning screw through the top center
cabinet hole. Temporarily secure the oven by turning
the screw at least
two full turns
after the threads
have engaged. (It will be completely tightened later.)
Be sure to keep the power cord tight. Be careful
not to pinch the cord, especially when mounting
flush to the bottom of cabinet.
Cabinet Front
Filler Block
Microwave Oven Top
Self-Aligning Screw
Equivalent to
Depth of
Cabinet Recess
Cabinet Bottom Shelf
Equivalent to
Depth of Cabinet
Recess
Cabinet Bottom Shelf
Microwave Oven Top
Cabinet Front
Filler Block
Self-Aligning Screw
4
. Attach the microwave oven to the top cabinet.
5
. Insert the 2 self-aligning screws through the cabinet
bottom shelf and filler block into the outer top cabinet
of the unit. Continue to support the unit until both
screws are inserted and engaged at least two full
turns, then fully tighten both screws until the unit is
secure.
6
. Install the grease filters. See the Owner’s Manual
packed with the microwave for instructions.
E. CONNECTING DUCTWORK FOR
OUTSIDE TOP EXHAUST
House Duct
House Duct
1
. Extend the house duct down to connect to the
exhaust adaptor.
2
. Seal the exhaust duct joints using duct tape.
SMH1927_XAC_DE68-04108D-02_EN+CFR.indb 17
SMH1927_XAC_DE68-04108D-02_EN+CFR.indb 17
2022-01-20 오전 10:26:15
2022-01-20 오전 10:26:15
