E-
4
Before installing the DMS(Data Management Server)
The following items need to be prepared before installation.
WARNING
• Only static IP must be used for the DMS. (Public IP or private IP)
The DMS is a server and only static IP must be used. To access the
DMS through the internet or with SNET series, the DMS address,
which is the IP address, must be known. A static IP service from an
internet service provider must be used if xDSL (ADSL, VDSL) is being
used for internet connection. (Static IP costs more than dynamic IP.)
Choosing between a private IP and a public static IP depends on
whether the DMS needs to be controlled from an external location.
General DSL service uses dynamic IP and cannot be used with the
DMS. Refer to page 23~24 for explanation on technical terms.
DMS IP
A public IP is needed to access the DMS over the internet.
(One public IP is needed for each DMS)
A private IP may be used if the DMS need not be accessed
over the internet.
The DMS does not support *DHCP.
Note
*DHCP(Dynamic Host Configuration Protocol)
An Internet protocol for automating the
configuration of computers that use TCP/IP.
DHCP is used to automatically assign IP addresses.
In other words, the IP address of the host is supported
only when the PC is on.
N
ETWORK
RELATED
EQUIPMENTS
Network equipments such as HUBs and network cables
are not provided by Samsung.
I
NSTALLATION
NOTICE
The DMS is recommended to be wall-mounted to prevent
damage to the product and for safety issues.
The LAN cable and the communication cables(C1,C2)
from the centralized controllers must be installed
in such a way that the wires can be connected to
the DMS with ease.
MIM-D00_IM_E_29919-1.indd 4
2008-09-10 ｿﾀﾈﾄ 1:27:10
