E-
64
5
Click [Remove disappeared] to remove all disappeared devices which were found
after tracking.
6
Change zone properties.
You can select “General”, “AHU”, and “Group”.
7
Click [Apply].
Edited zone structure will be applied.
8
To cancel the setting, click [Cancel].
Mode
Property name
Description
Remarks
Individual
initialization
mode
General
▪
Virtual group which is managed by
installation address, not by RMC
address
▪
The user can create and delete zone.
-
Group
Not applicable.
( Only supported in group initialization
mode.)
Not applicable.
( Only supported in group initialization
mode.)
AHU
▪
Virtual group which manages AHU kit
in general zone.
▪
The user can create and delete.
▪
It will be displayed as single device in
the control and monitoring screen, and
it can be controlled as single device.
▪
You cannot move subordinate device
to the other zone.
Group
initialization
mode
General
▪
Virtual group which is set and
managed by the user.
▪
The user can create and delete.
-
Group
▪
Virtual group which is managed by
installation address, not by RMC
address.
▪
The user cannot create and delete.
DMS2 creates it automatically.
▪
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
▪
You cannot move subordinate device
to the other zone.
AHU
▪
Virtual group which manages AHU kit
in general zone.
▪
The user can create and delete.
▪
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
▪
You cannot move subordinate device
to the other zone.
Zone Management (Continued)
MIM-D00A_DMS2_IB_E 33388-2.indd 64
2011-08-17 오전 11:01:16
