E-
143
RMS Service Usage Setting
1
Click [System Settings]
£
[RMS settings] when DMS2.5 web page menu screen
appears.
K
RMS is a Remote Management Service of a system air conditioner
2
Click [Edit] on Service usage section to select whether or not to use the RMS.
- Select either ‘Use’ or ‘Unuse’
X
When ‘Use’ is selected, enter the Connection ID and the License ID as instructed
in step 3 and 4.
X
When ‘Use’ is selected, DNS server address must be set on the DMS network
information section of the [System Settings]
£
[System Environment setting] menu.
X
When ‘Unuse’ is selected, Connection ID and the License ID setting is not necessary.
(Skip to step 5)
3
Enter the Connection ID.
K
Connection ID is required to classify the DMS in the RMS server.
X
Click [Edit] and enter the Connection ID.
X
If the connection ID was not assigned, add the DMS of the corresponding site on
the RMS web page and get a connection ID.
4
Enter the License ID.
K
To use the RMS service, license ID must be entered.
X
Click [Edit] and enter the License ID.
3
4
2
1
Summary of Contents for MIM-D01AUN
Page 123: ...E 123 6 5 Click SD card restore 6 Select the check box of file to restore 7 Click OK 5 7 ...
Page 178: ...E 178 MEMO ...
Page 179: ...E 179 ...
Page 180: ...DB68 06098A 03 ...
