14
15
Maintenance Form: Year 2
The engineer should leave a copy of this form with the home owner as evidence of an annual service to keep up with the warranty.
Heating Mode Commissioning Data
What type of system do you have?
Pre-plumbed / Separate Cylinder
Is there a Header, Buffer or Heat Exchanger installed?
You need to measure the following and record the data:
Flow temperature at Heat Pump
Measure with pipe thermometer
Return temperature at Heat Pump
Flow temp into header / plate
Return from header / plate
Flow temp out of header /
plate to heating
Return from Heating into
header / plate
Flow rate from flow meter
Air temp at the back of the unit
Ambient air temperature
Measure from the garden
Hot water cylinder model No.
Cylinder water temp at start-up
Measure from the remote controller
Cylinder water temp after 30mins
Measure from the remote controller
Water flow temp at cylinder
Measure with pipe thermometer
Water return temp at cylinder
Measure with pipe thermometer
Flow Rate
Measure from the flow meter
Hot Water Mode Commissioning Data
You must be running the heat pump in hot water mode for this section
Pump Z1
Header,
Buffer or
Heat
Exchanger
Pump HP
H
HW
Flow and Return
at Heat Pump
Flow Rate
Return from
Header
Flow out of
Header
Flow into
Header
Return from
Heating
Maintenance Form: Year 3
The engineer should leave a copy of this form with the home owner as evidence of an annual service to keep up with the warranty.
Heating Mode Commissioning Data
What type of system do you have?
Pre-plumbed / Separate Cylinder
Is there a Header, Buffer or Heat Exchanger installed?
You need to measure the following and record the data:
Flow temperature at Heat Pump
Measure with pipe thermometer
Return temperature at Heat Pump
Flow temp into header / plate
Return from header / plate
Flow temp out of header /
plate to heating
Return from Heating into
header / plate
Flow rate from flow meter
Air temp at the back of the unit
Ambient air temperature
Measure from the garden
Hot water cylinder model No.
Cylinder water temp at start-up
Measure from the remote controller
Cylinder water temp after 30mins
Measure from the remote controller
Water flow temp at cylinder
Measure with pipe thermometer
Water return temp at cylinder
Measure with pipe thermometer
Flow Rate
Measure from the flow meter
Hot Water Mode Commissioning Data
You must be running the heat pump in hot water mode for this section
Pump Z1
Header,
Buffer or
Heat
Exchanger
Pump HP
H
HW
Flow and Return
at Heat Pump
Flow Rate
Return from
Header
Flow out of
Header
Flow into
Header
Return from
Heating
