Using the Sparkling Water Function
(For Sparkling Water Refrigerators Only - Optional)
To do list
4. Disassembly and Assembly
116
4-35. Assembling Procedures of the CO2 Cylinder and Precautions
Sparkling Water Production Time
Depending on the Carbonation Level you set (See Setting the Carbonation Level), the amount of
time it takes the refrigerator to complete the sparkling water production process changes. The table
below lists the production times by Carbonation Level. The refrigerator is pre-set at the factory to
Level 2.
Carbonation Level
Level 3 - Hi
Level 2 -Med
Level 1 - Low
Production Time
About 30 minutes
About 20 minutes
About 10 minutes
Capacity
1.16 quarts (1.1ℓ)
1.16 quarts (1.1ℓ)
1.16 quarts (1.1ℓ)
Dispensing Sparkling Water
To dispense sparkling water, press the Sparkling Water button. Then, push the Ice/Sparkling Water
lever gently with a glass. As time passes, the sparkling water dispensing speed can change. When
the water tastes strongly carbonated, the dispensing speed can be faster. When the carbonation is
weaker, the dispensing speed can slow.
The dissolved CO2 in the sparkling water can also cause the water to pop out when you dispense it.
In addition, due to the pressure fluctuations in the Sparkling Water Tank, the water stream may shake or
become intermittent.
If you keep dispensing sparking water, the water stream may become unstable or break up. This is
caused by changes in pressure in the Sparkling Water Tank. It is not a defect.
