Introduction
_ 21
UNDERSTANDING THE CONTROL PANEL
LEDs
The color of the LEDs indicates the machine's current status.
Samsung does not recommend using non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.
All printing errors will be appear in the Smart Panel program window. If
the problem persists, call for service.
Buttons
(Demo print button)
It prints a demo page by pressing this button only.
(
Cancel button
)
By pressing the
(cancel button), you can:
LED
STATUS
DESCRIPTION
Wireless (
)
Blue
On
Wireless function can be used.
Status (
)
Off
The machine is off-line.
Green
On
The machine is on-line and can
receive data from the computer.
Blinking
•
When the LED slowly bilnks,
the machine is receiving data
from the computer.
•
When the LED rapidly blinks,
the machine is printing data.
Red
On
•
The cover is opened. Close
the cover.
•
There is no paper in the tray.
Load paper in the tray.
•
The machine has stopped
due to a major error.
•
Your system has some
problems. If this problem
occurs, contact your service
representative.
•
A toner cartridge has almost
reached its estimated
estimated cartridge life
a
. It is
recommended to replace the
toner cartridge. (See
"Replacing the toner
cartridge" on page 40.)
a. Estimated cartridge life means the expected or estimated toner
cartridge life, which indicates the average capacity of print-outs and is
designed pursuant to ISO/IEC 19752. The number of pages may be
affected by operating environment, printing interval, graphics, media
type and media size. Some amount of toner may remain in the cartridge
even when red LED turned on and the printer stops printing.
Blinking
•
A minor error has occurred
and the machine is waiting for
the error to be cleared. When
the problem is cleared, the
machine resumes.
•
Small amount of toner is left
in the cartridge. The
estimated cartridge life
a
of
toner is close. Prepare a new
cartridge for replacement.
You may temporarily increase
the printing quality by
redistributing the toner. (See
"Redistributing toner" on
page 30.)
Orange
On
A paper jam has occurred.
(See "Clearing paper jams" on
page 31.)
FUNCTION
DESCRIPTION
Printing demo page
In Ready mode, press and hold this button for
about 2 seconds until the status LED blinks
slowly, and release. (See "Printing a demo
page" on page 23.)
Printing configuration
sheet
In Ready mode, press and hold this button for
about 5 seconds until the status LED blinks
fast, and release. (See "Printing a machine
report" on page 28.)
Printing a cleaning
sheet
In Ready mode, press and hold this button for
about 10 seconds until the status LED blinks
slowly, and release. (See "Cleaning the inside"
on page 28.)
Cancel print job
Press
(cancel button) during printing. The
red LED blinks while the print job is cleared
from both the machine and the computer and
then the machine returns to ready mode. This
may take some time depending on the size of
the print job.
Manual print
Press
(cancel button) each time you load a
sheet of paper in the
manual tray when you select
Manual Feeder
for
Source
from your software application.