78
Chapter 5. Menu
System ▼
2nd
3rd
Description
Time
You can configure
Clock Set
or
Sleep Timer
. You can also set the product to automatically turn on or off at a
specified time using the
Timer
function.
• Press the
INFO
button if you want to view the current time.
Clock Set
Select
Clock Set
. Select
Date
or
Time
, and then press
.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press
when done.
•
You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
Sleep Timer
Automatically shuts off the product after a preset period of time.
• Use the up and down arrows to select a period of time, and then press
. To cancel
Sleep Timer
, select
Off
.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Auto Source Switching
Turning on the display with
Auto Source Switching On
, and the previous video source selection is not active, the
display will automatically search the different video input sources for active video.
Auto Source Switching
When the
Auto Source Switching
is
On
, the display video source will automatically be searched for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary Source
selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the
Primary Source
selection is set to
All
, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
• The
Primary Source Recovery
function is disabled if
Primary Source
is set to
All
.
Primary Source
Specify
Primary Source
for the automatic input source.
