You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
Press
Sleep
on the remote control.
Result: The following indications are displayed:
Press Sleep one or more times to indicate how long the system should
continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing Sleep
Change the remaining time by repeating Steps 1 and 2
To cancel the sleep timer function, press Sleep one or more times until
OFF
is displayed and the word
SLEEP
disappears.
GB
17
16
B
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,
you must start again.
Switch the system on by pressing
On/Standby ( )
.
Press
Timer/Clock
until
TIMER
is displayed.
Press
Program/Set
.
Result:
ON TIME
is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by pressing
Tuning
and .
b
Press
Program/Set
.
Result: The minutes flash.
c
Set the minutes by pressing
Tuning
and .
d
Press
Program/Set
.
Result:
OFF TIME
is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
Set the timer switch-off time.
a
Set the hour by pressing
Tuning
and .
b
Press
Program/Set
.
Result: The minutes flash.
c
Set the minutes by pressing
Tuning
and .
d
Press
Program/Set
.
Result:
VOL 10
is displayed, where
10
corresponds to the volume already set.
Press
Tuning
and
to adjust the volume level and press
Program/Set.
Result:The source to be selected is displayed.
Press
Tuning
and
to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in the deck.
TUNER (radio)
a
Select the FM or AM frequency band by pressing
Tuning
and
.
b
Press Program/Set.
c
Select a preset station by pressing
Tuning
and
.
CD (compact disc) Load compact disc.
Press
Program/Set
to confirm the timer.
Press
On/Standby
to set the system to standby mode.
Result:
is displayed to the middle right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word
ERROR
is displayed.
After having set the timer, it will start automatically as shown by
the
indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer On/Off
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
Timer Function
On/Standby
Timer
On/Off
EQ Preset
Power
Sound
Sleep
CD Repeat Mono/ST.
TUNER
Program
/Set
AUX
Timer/
Clock
Cancelling the Timer
On/Standby
Timer
On/Off
TAPE
EQ Preset
Power
Sound
Sleep
CD Repeat Mono/ST.
TUNER
Band
Program
/Set
AUX
Timer/
Clock
CD
CD
CD
VOL.
VOL.
Tuning
Mode
CD
CD
Power sound function
EQ
Down
Mute
Counter
Reset
Repeat
A B
Tuning Mode
REC/Pause
CD Sync.
Up
S.Bass
Power
Sound
CD
AUX
TUNER
TAPE
Band
Sleep Timer
S.Bass
(Super Bass) Function
TAPE
EQ Preset
Power
Sound
Sleep
CD Repeat Mono/ST.
TUNER
Band
Program
/Set
AUX
CD
90 MIN
60 MIN
45 MIN
OFF
15 MIN
30 MIN
EQ
Down
Mute
Counter
Reset
Repeat
A B
Tuning Mode
REC/Pause
CD Sync.
Up
S.Bass
Volume
Power
Sound
CD
AUX
TUNER
TAPE
Band
This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
real surround-sound.
Press the
Power Sound
button on the front panel.
Result:
P. SOUND
is displayed for a few seconds.
A more powerful resonant sound is diffused.
To cancel this function, press
Power Sound
again.
Result:
OFF
is displayed for a few seconds.
Your Micro Component system has a bass amplification function
called S.Bass.
This function makes the sound more powerful and real.
Press the
S. Bass
button on the front panel.
Result:
S. BASS
is displayed.
To cancel this function, press
S. Bass
button again.
Your micro-component system is equipped with a preset equal-
izer that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Press
EQ
on the front panel or EQ Preset on the remote control until the
required option is selected.
Press the button repeatedly to select
“
POP
➞
ROCK
➞
CLASSIC
➞
PASS
”
Selecting an Equalizer Preset
EQ
Down
Mute
Counter
Reset
Repeat
A B
Tuning Mode
REC/Pause
CD Sync.
Up
S.Bass
Volume
Power
Sound
CD
AUX
TUNER
TAPE
Band
1
3
4
5
6
7
8
2
1,8
2
3,4,5,6,7
4,5,6,7
4,5,6,7
1
2
1
2
3
1,2,3
1
2
