Samsung MM-N4 Instruction Manual Download

Page: 16 / 21

This machine is equipped with the function of POWER SOUND, which
amplifies bass treble output to twice as much for powerful real
surround-sound.

Press the Power Sound button on the front panel.
Result:

P- - SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.

To cancel this function, press Power Sound again.

You can connect a set of headphones to your micro component
system so that you can listen to music or radio programs without
disturbing other people in the room. The headphones must have a
3.5 mm connector or appropriate adapter.

Connect the headphones to the

Phones connector on the front panel

(bottom left corner).

Result: The loudspeakers are no longer used for sound output.

Prolonged use of headphones at a high volume may
damage your hearing.

The auxiliary input can be used to take advantage of the sound
quality of your micro audio system when listening to other
sources.

Example:

A television
A video disc player
A DAT or DCC cassette player
A Hi-Fi stereo video cassette recorder

To connect to an external source, the external source must
have an audio output terminal. In addition, you need an RCA
connection cable.

Before

connecting to an extern

al source, set the system to standby

mode and disconnect it and the external source from the outlet.

Connect the audio cable to the rear of the system.

Connect the...

To the connector marked...

Red jack

R (right)

White jack

L (left)

For optimum sound quality, do not invert the right and left
channels.

Plug the system back into the wall outlet and press On/Standby
to switch it on.

Press AUX.
Result:AUX is displayed.

Switch the external source on.

Adjust the volume and balance as required:

Volume
Equalizer
S. BASS

Example:

You can watch a film and take advantage of stereo
sound as if you were at the cinema (provided that the
original sound track is in stereo).

Power sound function

Connecting Headphones

Connecting to an External Source

Band

TUNER

On/Standby

Power Sound

Phones

CD Synchro

Volume

Preset

S.BASS

Down

REC/Pause

Repeat(A<->B)

TAPE

AUX

Tuning Mode

Pty

Display

Mute

RDS

Band

TUNER

On/Standby

Phones

CD Synchro

Volume

Preset

S.BASS

Down

REC/Pause

Repeat(A<->B)

TAPE

AUX

Tuning Mode

Pty

Display

Mute

RDS

AUX

Power Sound

Phones

CD Synchro

Volume

Preset

S.BASS

Down

REC/Pause

Repeat(A<->B)

Tuning Mode

Pty

Display

Mute

RDS

Power Sound

Summary of Contents for MM-N4






















Search results

Summary of Contents for MM-N4

Reviews:

Related manuals for MM-N4

Brands by name

Popular brands

Samsung MM-N4, Instruction Manual

Search results

Summary of Contents for MM-N4

Reviews:

Related manuals for MM-N4

Brands by name

Popular brands