background image

GB

6

Your system is equipped with a clock which allows you to turn
your system on and aff automatically. You should set the clock:

When you purchase the Micro component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.

1

Switch the system on by pressing On/Standby.

2

Press Timer/Clock twice.
Result:

CLOCK is displayed.

3

Press Program/Set.
Result:

The hour flashes.

4

To...

Press...

Increase the hours
Decrease the hours

5

When the correct hour is displayed, press Program/Set.
Result:

The minutes flash.

6

To...

Press...

Increase the minutes
Decrease the minutes

7

When the correct time is displayed, press Program/Set.
Result:

The clock starts and is displayed, even when the
system is in standby mode.

You can display the time, even when you are using another
function, by pressing Timer/Clock once. 

You can play 12 cm or 8 cm compact discs without an adapter.

1

Select the CD function by pressing CD on the front panel.

2

Open the compact disc compartment by pressing down and
releasing the cover.

3

Place your disc in the compartment, with the label on the disc
facing upwards.

4

Close the compartment by pushing down on the cover until it
clicks into place.
Result:

The display indicates the number of tracks 
on the disc.

5

Press the PLAY/PAUSE (

) button.

Result:

The first track on the disc plays and the track
number is displayed.

6

To stop playback temporarily, press the PLAY/PAUSE (

)

button.

Press PLAY/PAUSE (

) again to continue playing

the disc.

7

To start playing 

Press...

at the beginning of...

The next track

SKIP/SEARCH 

once

The current track

SKIP/SEARCH 

once

The previous track

SKIP/SEARCH 

twice

The track of your choice

SKIP/SEARCH 

or 

the appropriate number of times

8

To search through 

Press and hold down...

the tracks...

Forwards

SKIP/SEARCH until 

you 

reach the required point

Backwards

SKIP/SEARCH until 

you 

reach the required point

You are advised to turn the volume down before using
this function.

9

Press the STOP (

) button when you have finished.

Setting the Clock

CD

CD

VOL.

VOL.

Tuning

Mode

On/Standby

Power

Surround

Open

/Close

Timer

On/Off

CD Repeat

Shuffle

Mono/ST

Timer

/Clock

Program

/Set

Tuner

/Band

AI Off/Sleep

Classic

Rock

Pop

Aux

CD

CD

CD

2

1

7

4

4

6

6

3 5

Listening to a Compact Disc

CD

CD

CD

VOL.

VOL

Tuning

Mode

CD

CD

Mic

VOLUME

Tuning Mode

Classic

Rock

Pop

dby

eat

 B)

Open/Close

TUNER

CD

Band

AUX

VOLUME

Phones

Mic

TUNER

CD

TAPE

Tuning

Band

CD Synchro REC/Pause

Power
Surround

AUX

On/

Standby

Repeat
(A      B)

CD Repeat

Preset EQ

Open/Close

Open/Close

9

1

7

7

8

8

9

5 6

2 4

Summary of Contents for MM-N6




















Reviews: