20
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the
recording.
Switch the system on by pressing
( )
.
Insert a blank cassette in Deck.
Select the TUNER function by pressing
TUNER/BAND
.
Select the radio station that you wish to record by pressing
or button .
Press the
CD SYNC/REC/PAUSE
button
.
Result:
REC
is displayed and recording starts.
To stop recording, press
button.
1
2
3
4
5
6
The direct recording mode enables you to start recording with any
track on the compact disc.
You do not need to adjust the volume, as it has no effect on the recording.
Switch the system on by pressing
( )
.
Insert a blank cassette in Deck.
Press the
PUSH/EJECT
button (
) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
Recording a Radio Program
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the recording
with the start of the disc or track of your choice.
Switch the system on by pressing
( )
.
Insert a blank cassette in Deck.
Press the
PUSH/EJECT
button (
) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
Load a compact disc.
Press the
OPEN/CLOSE
button (
) to open the CD door.
Insert a CD and press the
OPEN/CLOSE
button (
) to close
the CD door.
Press the
MP3-CD/CD
(
√
/
»
) button.
Use the CD selection (
,
) buttons to select the desired song.
Press and hold
CD SYNC/REC/PAUSE
button.
When stopped, press and hold the button to start the recording
from the first piece of music.
Press and hold
CD SYNC/REC/PAUSE
button during the play-
back of CD to start the recording from the first part of the music
being played.
To stop recording, press
button.
Synchronised recording Funcation is available for CD only.
Synchronised recording
1
2
3
4
5
6
1
2
Direct recording
Recording a Compact Disc
4
6
1
4
2
Load a compact disc.
Press the
OPEN/CLOSE
button (
) to open the CD door.
Insert a CD and press the
OPEN/CLOSE
button (
) to close
the CD door.
Press the
MP3-CD/CD
(
√
/
»
) button.
Use the CD selection (
,
) buttons to select the desired song.
Press the
CD SYNC/REC/PAUSE
button.
Result:
Recording will begin.
To stop recording, press
button.
3
4
5
2
Always treat your cassettes with care; refer, if necessary, to the sec-
tion entitled “
Precautions When Using Audio Cassettes
” on
page 26
.
Switch the system on by pressing
( )
.
Open the cassette deck by pushing on the corner of the cover marked
PUSH EJECT
(
) until you hear a click and then releasing it.
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
Close the deck by pushing on it until it clicks into place.
To listen to...
Press ...
Side A
Tape (
) button once.
Side B
Tape (
) button twice.
Result: The cassette starts playing.
Press the
,
or
,
button on the remocon if necessary.
To...
Press ...
Rewind the cassette
/
button.
Fast-forward the cassette
/
button.
When you have finished playback, press
button.
Your micro component system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press REV.MODE until the appropriate symbol is displayed.
When the display indicates...
The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
Selecting the Cassette
Playback Mode
Listening to a Cassette
1
2
3
4
5
6
2,3
21
GB
GB
REV.MODE
TIMER
SLEEP REP
A-B REPEAT
MO/ST
CD SYNC
DISPLAY
TAPE
PTY
RDS
DIMMER
DEMO
TIMER/CLOCK
PROGRAM/SET
ON/OFF
USB
REV.MODE
3
5
4
1
4
5
6
5
1
4
5
4
5
4
3
1
6
4
4
5
3
MM-T8(GB)-5 4/24/06 16:1912:0 Page 20
