GB
19
The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing Standby/On ( ) .
Press Timer/Clock until
TIMER
is displayed.
Press Program/Set.
Result:
ON TIME
is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by pressing
or
button.
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing
or
button.
d
Press Program/Set.
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by pressing
or
button.
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing
or
button.
d
Press Program/Set.
Result:
VOL 10
is displayed, where
10
corresponds to the
volume already set.
Press
or
button to adjust the volume level and press
Program/Set.
Result: The source to be selected is displayed.
Press or
button to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a cassette tape.
TUNER (radio)
a Press Program/Set.
b Select a preset station by pressing
Tuning
or
.
CD (compact disc)
Load a compact disc.
Press Program/Set to confirm the timer.
Timer Function
7
5
6
1
2
3
4
Timer
On/Off
EQ/P.Sound
REV.
Mode
CD SYNC.
Display
CD
Repeat
Mono/ST
Mute
VOL.
Band
+10
Sleep
TAPE
Aux
Timer/
Clock
VOL.
Tune/CD
Mode
Program/
Set
PTY
RDS
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1,9
Press Stanby/On ( ) to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR
is displayed.
8
9