Samsung MM-ZJ8DAB Instruction Manual Download

Page: 16 / 28

You can receive a DAB (Digital Audio Broadcasting) broadcast with clear
CD-quality audio and text captions. However, because DAB broadcasting is
still in testing phase, you can receive the broadcast only in limited areas .

Press TUNER/BAND to select "

DAB

• Each time you press the button, the mode changes as follows:

➝

DAB

Press and hold TUNE for longer than 2 seconds.

• "

AUTO TUNE

" blinks on the display and all available services will

be searched.

• It will about 20 to 60 seconds to search all available services.

Some stations may not transmit PTY, information therefore this may

not be displayed in all cases.

Press TUNER/BAND to select "DAB".

• Each time you press the button, the mode changes as follows:

➝

DAB

Press TUNE.

• The current frequency will be shown on the display.

Press

on the remote control to move to the desired frequency.

Press TUNE.

• "

TUNING

" appears on display and the station will be searched.

If no signal is received, "NO SERVICE" will appear on the display.

3
4

If no signal can be received because the unit is being used for the first
time or because you have recently moved, please set available services.

174.928MHz

180.064MHz

185.360MHz

190.640MHz

195.936MHz

201.072MHz

206.352MHz

211.648MHz

216.928MHz

222.064MHz

227.360MHz

232.496MHz

237.488MHz

176.640MHz

181.936MHz

187.072MHz

192.352MHz

197.648MHz

202.928MHz

208.064MHz

213.360MHz

218.640MHz

223.936MHz

229.072MHz

234.208MHz

239.200MHz

178.352MHz

183.648MHz

188.928MHz

194.064MHz

199.360MHz

204.640MHz

209.936MHz

215.072MHz

220.352MHz

225.648MHz

230.784MHz

235.776MHz

DAB reception frequency (only band III)

• For each ensemble, there are various services such as audio and

data.

If you press

when there are many ensembles, you can

easily search services.

About Ensemble and Service

Listening to DAB Stations(Future proof digital radio tuner)

Automatic Tuning

Manual Tuning

Press TUNER/BAND to select "

DAB

• Each time you press the button, the mode changes as follows:

➝

DAB

Select the service.

• Press

to select the service and press

to change the ensemble.

Press TUNER/BAND to select "

DAB

Select the service.

• If "

NO SERVICE

" appears on the display, press and hold TUNE

for longer than 2 seconds.

AUTO TUNE

" blinks on the display and all available services will

be searched. If "

NO SERVICE

" continues to be displayed after

the service search has finished, make sure you are not in a non-

reception area and check the antenna connection.

Remote Control Unit

Main Unit

1
2

2,4

MM-ZJ8(GB)DAB 9/16/04 8:35 Page 16

Summary of Contents for MM-ZJ8DAB





























Search results

Summary of Contents for MM-ZJ8DAB

Reviews:

Related manuals for MM-ZJ8DAB

Brands by name

Popular brands

Samsung MM-ZJ8DAB, Instruction Manual

Search results

Summary of Contents for MM-ZJ8DAB

Reviews:

Related manuals for MM-ZJ8DAB

Brands by name

Popular brands