EN
GL
ISH
11
Setting the On/Off timer
Additional options available in On timer mode
You can select from
(Cool)
(Dry)
(Fan)
(Heat).
(Heat mode is applicable to MR-DH00/DH00U model only.)
You can adjust the temperature in Auto/Cool/Dry/Heat mode
However, you cannot adjust the temperature in fan mode.
(Heat mode is applicable to MR-DH00/DH00U model only.)
You can adjust the desired fan speed .
You can set the air conditioner to turn on/off automatically at desired time.
1. Press
On timer
or
Off timer
button.
(On) / (Off) timer indicator will blink on the remote controller display.
2. Press
On timer
or
Off timer
button repeatedly to set the time.
You can set the time in half hourly units from 30minute ~ 3hours and hourly units
from 3hour ~ 24hours.
The set hour is set to minimum 30minutes and maximum 24hours.
3. Press
Set/Cancel
button to activate it.
(On) / (Off) indicators will stop blinking and the set time will be displayed.
If you don’t press Set/Cancel button within 10 seconds after selecting the on timer
or off timer button, the air conditioner will return to the previous status, so you
should check the (On) or (Off) indicator on the remote controller display.
Setting On timer
Setting Off timer
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on.
Press the Set/Cancel button once again.
Cancel
• Only the latest setting timer will be applied between the On Timer/Off Timer
and
off timer functions.
• About 10 seconds after setting the On timer, only the set time will be
displayed on the remote controller.
NOTE
MR-DH00_IB E 33129A(2).indd 11
2011-04-06 오후 2:11:55
