4
Power
Turn the air conditioner on/off.
S-Plasma ion
Set the S-Plasma ion function on/off.
Turbo
Cool or
heat
your room quickly and
powerfully.
Temp +-
Increase/Decrease the temperature
by 1˚C.
On Timer
Set the On Timer on.
Beep off
To silence the beep sounds when
pressing the button.
Room
Control from an individual indoor unit
to all indoor units.
2
nd
F
Select the function printed
under the button.
Air swing
Activate/Deactivate air flow blade
movement automatically left and right
Mode
Select one of the 5 operation modes.
Filter Reset
The filter indicator light will be off.
Blade
Control from an individual blade to all
blades.
Fan
Adjust amount of air flowing through the
air conditioner with the 4 different fan
speeds such as Auto/Low/Medium/High.
Air swing
Activate/Deactivate air flow blade
movement automatically up and down.
(not applicable to Duct type model)
Set/Cancel
Set or Cancel the on/off timer,
mode.
Set the
mode on.
Quiet
Reduce noise generated from an indoor
unit during operation.
Off Timer
Set the Off Timer on.
Remote controller display
Remote controller buttons
• Point the remote controller towards the remote controller receiver of the indoor unit.
• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator(
) appears on the remote controller display.
Remote controller instruction
•
2
nd
F button function
When you press 2
nd
F button, you can change the function of the button as listed below.
Beep off
Room, Filter reset
Blade
While the function of the button is switched by the 2
nd
F button, press the 2
nd
F button once again to go back to
previous function of the switched button.
• The functions that don’t support your air conditioner model will not operate even if they are on the remote
controller.
NOTE
MR-DH00_IB E 33129A(2).indd 4
2011-04-06 오후 2:11:43
