107
9. System and Other Settings
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Accessing the
menus" on page 21).
For network model, You can also use this feature from the SyncThru™ Web
Service. Open the Web browser from your networked computer and type
the IP address of your machine. When SyncThru™ Web Service opens, click
Settings
>
Network Settings
(see "Using SyncThru™ Web Service" on page
133).
•
Press
(
Menu
)>
Network
on the control panel,
Option
Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure
parameters to use the network environment (see
"Setting IP address" on page 52).
There are lots of parameters to be set. If you
are not sure, leave as is, or consult the
network administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 49).
Ethernet
Configure the network transmission speed or port.
Turn the power off and on after you change
this option.
Clear Settings
Reverts the network settings to the default values.
Turn the power off and on after you change
this option.
Network Configuration
This list shows information on your machine’s
network connection and configuration.
Protocol
Managem
ent
HTTP
You can set whether to use SyncThru™ Web Service
or not.
Turn the power off and on after you change
this option to
Off
.
WINS
You can configure the WINS server. WINS (Windows
Internet Name Service) is used in the Windows
operating system.
Option
Description
Summary of Contents for MultiXpress K220x Series
Page 1: ...User s Guide User s Guide ...
Page 119: ...Replacing the imaging unit 122 10 Maintenance ...
Page 125: ...Cleaning the machine 128 10 Maintenance K220xND series only ...
Page 186: ...Regulatory information 189 13 Appendix 19 China only ...