Installing software over the network
53
5. Using a Network-Connected Machine
3
Connect your machine to the network with a network cable.
4
Turn on the machine.
5
From the Windows
Start
menu, select
All Programs
>
Samsung
Printers
>
SetIP
>
SetIP
.
6
Click the
icon in the SetIP window to open the TCP/IP configuration
window.
7
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the
Network Configuration Report
(see "Printing a network configuration report" on page 52) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8
Click
Apply
, and then click
OK
. The machine will automatically print the
Network Configuration Report
. Confirm that all the settings are
correct.
8
Windows
•
Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
•
The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 17).
•
You can install the printer driver and software when you insert the
software CD into your CD-ROM drive. For windows, select the printer
driver and software in the
Select Software to Install
window.
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 52).
2
Insert the supplied software CD into your CD-ROM drive.
Summary of Contents for MultiXpress K220x Series
Page 1: ...User s Guide User s Guide ...
Page 119: ...Replacing the imaging unit 122 10 Maintenance ...
Page 125: ...Cleaning the machine 128 10 Maintenance K220xND series only ...
Page 186: ...Regulatory information 189 13 Appendix 19 China only ...