Samsung MultiXpress K4 Series Service Manual Download

Page: 247 / 526

4. Troubleshooting

4.4. JAM removal

4.4.1. Clearing original document jams

When an original jams while passing through the document
feeder(DSDF(X4300/4250) or RADF(X4220)), a warning
message appears on the display screen.

CAUTION

To avoid tearing the document, remove the jammed
document slowly and gently.

NOTE

To prevent document jams, use the scanner glass for thick,
thin, or mixed paper-type originals.

Original paper jam in front of scanner

1) Remove any remaining pages from the ADF.

2) Open the ADF cover.

3) Gently remove the jammed paper from the ADF.

4) Close the ADF cover.

4-12

Summary of Contents for MultiXpress K4 Series



























































































































































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands

Samsung MultiXpress K4 Series, Service Manual

Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands