Samsung MultiXpress K4 Series Service Manual Download

Page: 285 / 526

4. Troubleshooting

ADF Adjustment

•

Diagnostics > Adjustment > ADF Adjustment > Automatic Adjustment

Purpose

To correct image position and magnification of scanned images via DSDF/RADF automatically.

Operation Procedure

1) Locate the Scanner A/S chart on the DSDF/RADF tray.

2) Press “OK” button. Automatic scanning will occur, and the system will automatically

calculate the proper value based on scanning result of the chart .

3) The new value set to the system.

4) Copy the Scanner A/S Chart. Scanning must be occur from the DSDF/RADF.

5) To check the image position, compare the position of scale marks (a,b) of the chart to the

copy.

6) To check the magnification, compare the length of line “c” of the chart to the copy.

NOTE

Specification

•

a,b : 10, ± 1.5 mm

•

c: 190, ± 1.5 mm

NOTE

After executing ADF adjustment, the shading test must be executed. (

Refer to 4.5.5.3. Scanner

Diagnostics.

)

4-50

Summary of Contents for MultiXpress K4 Series



























































































































































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands

Samsung MultiXpress K4 Series, Service Manual

Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands