Samsung MultiXpress K4 Series Service Manual Download

Page: 382 / 526

4. Troubleshooting

► Error Code

M2–1124

M2–1125

► Error message

Paper jam inside of machine.

► Symptom

Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 1 sensor is defective.)

► Troubleshooting method

•

M2–1124 : The leading edge of the paper has not reached the feed 1 sensor within the specified time.

•

M2-1125 : The paper has not left from the feed 1 sensor within the specified time.

1) Open the side cover. Remove the jammed paper.

2) If jammed paper occurs continually, check the following.

a) Enter SVC mode. Execute feed motor test. If the motor operation is normal, go to step d).

b) Remove the rear cover. Check if the Regi/MP/feed motor cable is connected correctly.

c) If the connection is OK, replace the main drive unit(

JC93-00912A

(Refer to 3.3.12. Main Drive unit)

d) If the Regi/MP/feed motor operation is normal, check the pick up sensor.

e) If the sensor operation is abnormal, check the harness.

f) If the connection is OK, replace the pick up sensor(

0604-001381

(

Refer to 3.3.23. Pick up sensor

)

4-147

Summary of Contents for MultiXpress K4 Series



























































































































































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands

Samsung MultiXpress K4 Series, Service Manual

Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Related manuals for MultiXpress K4 Series

Brands by name

Popular brands