Understanding display messages
257
10. Troubleshooting
Replace with new
imaging unit
The indicated imaging
unit has almost
reached its estimated
imaging unit life
Replace the imaging unit
for the best print quality
when this message
appears. Using a imaging
unit beyond this stage can
result in printing quality
issues (see "Replacing the
imaging unit" on page
230).
Replace with new fuser
unit
The life of the fuser unit
expires totally.
Replace the fuser unit with
a Samsung-genuine fuser
unit, call for service.
Replace with new
Transfer roller
The life of the transfer
roller expires totally.
Replace the transfer roller
with a Samsung-genuine
transfer roller, call for
service.
Replace with new [tray
number] pickup roller
The life of the tray
pickup roller expires
totally.
Replace the tray pickup
roller with a Samsung-
genuine pickup roller, call
for service.
Scanner locked or
another problem
occurred
The CCD (Charged
Couple Device) lock
has been locked.
Unlock the CCD lock
. Or
turn the machine off and
back on again. If the
problem persists, call for
service.
Message
Meaning
Suggested solutions
Scan System Failure
[error number]:Turn off
then on
There is a problem in
the scan system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Sensor Failure: [error
number]. Turn off then
on. Call for service if the
problem persists
There is a problem in
the sensor system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Shake [color] toner
cartridge
Small amount of toner
is left in the indicated
cartridge.
•
You may temporarily
increase the printing
quality by
redistributing the toner
(see "Redistributing
toner" on page 225).
•
If the problem persists,
call for service.
The clock became initial
time. Set a time again
The time setting of
machine is initialized.
Set the time setting in
Machine Setup
.
The IPv4 address
assigned to wireless LAN
conflicts with that of
other system. Check it
The IPv4 address is
used
elsewhere(wireless
LAN).
Check the IPv4 address or
obtain a new IP address.
The IPv6 address
assigned to wireless LAN
conflicts with that of
other system. Check it
The IPv6 address is
used
elsewhere(wireless
LAN).
Check the IPv6 address or
obtain a new IP address.
Message
Meaning
Suggested solutions