Opening printing preferences
78
3. Printing
Toner Save
The
Toner Save
setting allows the user to save printing toner when printing a
draft version of a document. Select Off to print in normal mode and select On to
print with less toner applied to the page.
6
Finishing tab
Use the
Finishing
tab to set various finishing options.
Sort Options
This option allows you to sort out the printouts easily.
•
None:
Disables this option.
•
Offset:
When printing multiple copies, this option shift the output position
of each set.
This feature is available only when the inner finisher or 2k, 3k booklet
finisher is installed.
•
Rotate:
When printing multiple copies, the printouts are stacked criss-
crossed in sets.
•
This feature is available only when the inner finisher or 2k, 3k booklet
finisher is installed.
•
This feature is available only with Letter and A4 sized print
media.
•
Before using this feature, you have to load the paper in the trays with
SEF(Short edge feed) and LEF(Long edge feed). For example, direction of
paper feeding in the tray 1 is SEF,
and direction of paper feeding in the
tray 2 is LEF.
Staple Options
This option allows you to specify the number of staples and the staple position.
This option is available only when the optional standard finisher or booklet
finisher is installed.
•
Staple:
Select the number of staples between
1 Staple
and
2 Staple
.
•
Position:
Select the position of staples among
Left
,
Right
and
Top
.
When you use the staple and punch together, you can only set the same
position for staples and punch holes.
