344
3. Network Setup
Set Protocols
You can enable/disable the protocols (
Standard TCP/IP
,
LPR
,
IPP
,
ThinPrint
,
CIFS
,
SNTP
(Simple Network Time Protocol),
SLP
(Service Location Protocol),
Telnet
,
SNMP V1/V2
(Simple Network Management Protocol),
SNMPv3
,
UPnP(SSDP)
Protocol, and
mDNS
(Multicast Domain Name System),
SetIP
, and
HTTP
.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine (see "Settings tab" on page 186).